COD DIGESTOR MANUFACTURER IN AHMEDABAD We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal ● The Cod Digester is designed for the digestion of chemical oxygen demand (COD) samples, providing precise temperature control to break down organic matter. It is essential for environmental and water quality analysis, ensuring accurate. ● Suitable for COD method for monitoring wastewater influent and effluent, industrial process water and more. Aluminium Heating block with holes is used to hold C.O.D tubes. (With tubes, condensers and stands). ● Temp. Range: Above ambient to 180°C. ● Timer: 99 Hr: 59 min. to switch off the heater after the test. ● Hole Size: 40mm dia. × 80 mm depth. ● Sample Volume: 20 ml. each. Model No. Tube Capacity HSI/COD-01 6 Tubes HSI/COD-02 9 Tubes HSI/COD-03 12 Tubes HSI/COD-04 15 Tubes HSI/COD-05 18 Tubes HSI/COD-06 21 Tubes HSI/COD-07 24 Tubes HSI/COD-08 36 Tubes Any Customize Size can be made as per your requirement

pH METER Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal A pH meter is an essential scientific instrument used to measure the acidity or alkalinity of a solution. The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral, values below 7 indicate acidic solutions, and values above 7 indicate alkaline solutions. The accurate measurement of pH is critical in various fields, including chemistry, biology, environmental science, and food industries. The pH meter operates by using a special electrode, often referred to as the pH probe. This electrode consists of a glass membrane sensitive to hydrogen ions, which are present in acidic and alkaline solutions. The pH probe generates a voltage corresponding to the concentration of hydrogen ions in the sample, and the meter converts this voltage into a readable pH value. This makes pH meters highly efficient and accurate, especially compared to traditional pH test strips.

Fume Hood Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal * Complete S. S. Models are also Available Safety in the Laboratory is a primary concern. The fume hoods meet the challenge high degree of efficiency. A wide variety of models and comprehensive option packages have been designed to enable you to tailor your fume hood to a specification FUME HOOD MADE OF COMPLETE MILD STEEL: Are manufactured from best quality C.R.C.A. Sheets (Cold Rolled Case Annealed Low carbon steel sheets) of 18/20G which are duly epoxy polyester powder coated. Powder coating of this quality provides better protection from acid fumes in the lab. The Fume Hood is designed to provide a safe working environment by ventilating hazardous fumes, vapors, and particulates away from the user. It ensures effective containment and protection during chemical handling and experimentation in laboratory settings. FUME HOOD MADE OF COMPLETE WOOD: Are manufactured from well seasoned teakwood and 12mm thick marine plywood panels. Outer surface are lined with laminates Both Fumes Chamber: Are available with variety of lining and work surface like PP, PPGL, FRP, SS, (316), PVC, HDPE, suspended on suspended on safe device. It is provided with counter balance load for easy up and down movement * Are aerodynamically designed which provides most efficient airflow to the suction Are double wall construction which provides easy maintenance, access to service like Water gas, electricity etc. Are provided with support base having provision for air vent connection to evacuate lapped chemical vapor inside. Are provided with switch for easy starting of the centrifugal fan. High quality HDPE/FRP/PPGL/PP/PVC pipes & accessories are used for FC during We are using centrifugal PP/FRP Blower for Exhaust system of FC, 3 Phase Motor (Capacity according to need) is coupled with blower