Fume Hood Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal * Complete S. S. Models are also Available Safety in the Laboratory is a primary concern. The fume hoods meet the challenge high degree of efficiency. A wide variety of models and comprehensive option packages have been designed to enable you to tailor your fume hood to a specification FUME HOOD MADE OF COMPLETE MILD STEEL: Are manufactured from best quality C.R.C.A. Sheets (Cold Rolled Case Annealed Low carbon steel sheets) of 18/20G which are duly epoxy polyester powder coated. Powder coating of this quality provides better protection from acid fumes in the lab. The Fume Hood is designed to provide a safe working environment by ventilating hazardous fumes, vapors, and particulates away from the user. It ensures effective containment and protection during chemical handling and experimentation in laboratory settings. FUME HOOD MADE OF COMPLETE WOOD: Are manufactured from well seasoned teakwood and 12mm thick marine plywood panels. Outer surface are lined with laminates Both Fumes Chamber: Are available with variety of lining and work surface like PP, PPGL, FRP, SS, (316), PVC, HDPE, suspended on suspended on safe device. It is provided with counter balance load for easy up and down movement * Are aerodynamically designed which provides most efficient airflow to the suction Are double wall construction which provides easy maintenance, access to service like Water gas, electricity etc. Are provided with support base having provision for air vent connection to evacuate lapped chemical vapor inside. Are provided with switch for easy starting of the centrifugal fan. High quality HDPE/FRP/PPGL/PP/PVC pipes & accessories are used for FC during We are using centrifugal PP/FRP Blower for Exhaust system of FC, 3 Phase Motor (Capacity according to need) is coupled with blower

HOT AIR OVEN Lab Type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use CONSTRUCTION: Double walled construction inner chamber made of Mild Steel/ Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilations is provided on the top of unit to remove hot gases/fumes. Supplied with galvanized wire mesh shelves. The Hot Air Oven Labtype is a precision instrument designed for sterilization, drying, and thermal testing in laboratory settings. It provides consistent, high-temperature performance, ensuring reliable results for various scientific and industrial applications. HEATING ELEMENT Heating is by specially designed heaters made of special grade chrome plated Nichrome wire (ISI Approved) which is fitted at the bottom of the oven. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : ±2°C Temp. Control : Temperature Controlled by Thermostat OPTIONAL ACCESSORIES Digital Temperature Controller - Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

Laboratory Water Bath 6 Hole Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Shape Rectangular Automation Grade Automatic Material Outer MS powder coated ; Inner SS Voltage 220 V Country of Origin Made in India Minimum order quantity: 1 Piece We are Engaged in offering wide range of quality products to our clients , our products are really appreciated by our clients

Bacteriological Incubator Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Brand HEMA(TM) Shape Rectangular Temperature Range 100 DegreeC Automation Type Automatic Warranty 1 Year Chamber Size 14x14x14 Chamber Volume Litre 60 ltr. Control Mode Digital Controller Type Digital Microprocessor based PID controller Accuracy +-1 DegreeC Minimum order quantity: 01 Piece We are Manufacturer of Scientific, Laboratory Instruments. We Manufacture Bacteriological Incubator as per customer requirement and Specifications given.

Constant Temperature Water Bath Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Constant Temperature Water Bath provides stable and precise temperature control for a range of laboratory applications. It ensures uniform heating, making it ideal for tasks requiring consistent temperature conditions, such as sample incubation and chemical reactions. DESCRIPTION Double walled Construction, Inner made of Stainless Steel & exterior made of G.I Sheets powder coated / Stainless Steel . Gap between the two walls is filled with glass wool insulation. Heating is by immersion type heaters. Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Controller Temperature with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Temperature (SV) A circulation pump with motor is mounted on a base and fitted on the side of the bath for uniformity of temperature. Temperature Range : 5°C above ambient to 99°C. • Accuracy : ± 0.5°C. Power Supply : 230 Volts A.C 50 Hz Single Phase.

Viscosity Bath Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal The Viscosity Bath is a specialized laboratory instrument used to measure and control the temperature of fluids for precise viscosity testing. It ensures accurate and consistent temperature conditions, facilitating reliable viscosity measurements for various research and quality control applications. DESCRIPTION Double walled Construction, Inner made of Stainless Steel & exterior made of G.I Sheets powder coated. Gap between the two walls is filled with glass wool insulation. A motor with stirrer for better temperature uniformity. Toughened glass window on both sides. Temperature Range : 5°C above ambient to 99°C. Accuracy : ± 0.5°C with digital temperature controller. Power Supply : 230 Volts A.C 50 Hz Single Phase. OPTIONAL ACCESSORIES: Viscosity Holder

Water Bath Rectangular Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

Digital Water Bath 6 holes Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

Muffle Furnace Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Light weight Easy to use Low Energy Consumption High Temperature Accuracy Most Useful for Ashing, Fusion, Iigniting and Heat treating of small parts in Chemical, Industrial Fields, Colleges. The Muffle Furnace is a high-temperature laboratory furnace used for ashing, heat treatment, and material testing. It features a robust design and precise temperature control, making it ideal for applications requiring uniform and controlled heating up to extreme temperatures. CONSTRUCTION Muffle Furnace Horizontal rectangular Outer body made of thick gauge Mild Steel with powder coating. Ceramic fibre wool insulation to prevent heat loss. Uniform heat distribution through all four sides with Kanthal A1 element. A special solid state silver fuse for protection of element in case of over-heating. TECHNICAL DATA Temp. Range : Maximum Temperature 1150°C & Working Temperature 1100°C Digital Temp. Controller : Micro-processor with dual display to view set temperature and current temperature with K type sensor and 1°C Resolution Power Supply : 230 Volts A.C 50 Hz Single Phase