Fume Hood Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal * Complete S. S. Models are also Available Safety in the Laboratory is a primary concern. The fume hoods meet the challenge high degree of efficiency. A wide variety of models and comprehensive option packages have been designed to enable you to tailor your fume hood to a specification FUME HOOD MADE OF COMPLETE MILD STEEL: Are manufactured from best quality C.R.C.A. Sheets (Cold Rolled Case Annealed Low carbon steel sheets) of 18/20G which are duly epoxy polyester powder coated. Powder coating of this quality provides better protection from acid fumes in the lab. The Fume Hood is designed to provide a safe working environment by ventilating hazardous fumes, vapors, and particulates away from the user. It ensures effective containment and protection during chemical handling and experimentation in laboratory settings. FUME HOOD MADE OF COMPLETE WOOD: Are manufactured from well seasoned teakwood and 12mm thick marine plywood panels. Outer surface are lined with laminates Both Fumes Chamber: Are available with variety of lining and work surface like PP, PPGL, FRP, SS, (316), PVC, HDPE, suspended on suspended on safe device. It is provided with counter balance load for easy up and down movement * Are aerodynamically designed which provides most efficient airflow to the suction Are double wall construction which provides easy maintenance, access to service like Water gas, electricity etc. Are provided with support base having provision for air vent connection to evacuate lapped chemical vapor inside. Are provided with switch for easy starting of the centrifugal fan. High quality HDPE/FRP/PPGL/PP/PVC pipes & accessories are used for FC during We are using centrifugal PP/FRP Blower for Exhaust system of FC, 3 Phase Motor (Capacity according to need) is coupled with blower

BOD Incubator Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity APPLICATIONS Biological Oxygen Demand Determination General Incubation Serum studies Enzyme Assays test Microbiology Lab The BOD Incubator is a specialized laboratory device designed for precise temperature control in biochemical oxygen demand (BOD) testing. It ensures stable conditions for accurate microbial and biochemical analyses, making it essential for environmental and wastewater studies. CONSTRUCTION Double walled construction, Inner chamber made of Stainless Steel 304 grade & Outer chamber made of Mild Steel powder coated. OR Inner chamber made of Stainless Steel 304 OR 316 grade & Outer chamber made of Stainless Steel 304 grade - G.M.P. model The chamber is insulated by filling CFC Free Polyurethane foam (PUF) or high temperature glass wool in the space between outer body and chamber to prevent temperature loss. Double door - Outer metal body & Inner Acrylic Door. Inner door - made of imported transparent Acrylic which is useful to view inner sample without opening the door and loss of temperature. Outer door with magnetic gasket & proper handle, lock & key. Supplied with Adjustable Stainless Steel wire mesh shelves. Forced Air Circulating System with Fan for Temperature Uniformity. High Quality Compressor. Illumination provided for inner chamber. Control panel with indicating Lamp for Compressor, Heater and on / off switch for mains. Inner chamber with smooth corners for easy cleaning. Castor wheets for easy movability. HEATING ELEMENT Heating is by specially designed air heaters. Hermetically sealed compressor unit for CFC free cooling system as per the capacity. TECHNICAL DATA Temp. Range : 5°C to 60°C Temp. Accuracy : ± 0.5°C Temp. Uniformity : ± 1°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach - In BOD Testing Chmaber with in built recording, PC interface with 21 CFR Software, Dot Matrix Printer Interface. Data Logger for PC or Printer Attachment with software 4, 8, 12 Channel Data Scanner. Door access security system. Safety Digital Temperature Controller. Timer Recommended Stabilize.

Stability Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Stability Chamber is designed to simulate and control environmental conditions such as temperature and humidity to assess the stability of products over time. It is essential for testing the shelf life and performance of pharmaceuticals, chemicals, and other products under controlled conditions. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Humidity Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Humidity Chamber is designed to provide precise temperature and humidity regulation for accurate and consistent testing. It is ideal for applications requiring controlled environmental conditions, such as material testing, stability studies, and product development. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo-controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

HOT AIR OVEN GMP type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal ATURES Ergonomic Design Superior Functionality High Temperature Accuracy Better Temperature Uniformity The Lab Oven GMP is a high-quality laboratory oven designed to meet Good Manufacturing Practice (GMP) standards. It offers precise temperature control and uniform heating, ensuring consistent and reliable results for pharmaceutical and biotech applications. CONSTRUCTION Triple walled construction, Completely made of Stainless Steel Inner made of 316 Q & Outer made of 304 Q. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilation are placed at left & right side for hot gases / fumes. Supplied with Stainless Steel wire mesh shelves. Forced Air Circulating System with Fan for Temperature Uniformity. Safety Thermostat. HEATING ELEMENT Heating element of GMP model are placed at the right & left side of the inner chamber and is made of special grade chrome plated Nichrome wire (ISI Approved) for uniform temperature. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : ± 1°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Temperature (SV) OPTIONAL ACCESSORIES Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

HOT AIR OVEN Memmert Type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use High Temperature Accuracy Better Uniformity CONSTRUCTION: Triple walled construction, inner chamber made of Mild Steel / Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilation are placed at left & right side for hot gases / fumes. Supplied with galvanized wire mesh shelves. The Lab Oven Memmert Type is a reliable and efficient laboratory oven known for its precise temperature control and uniform heat distribution. Ideal for sterilization, drying, and thermal testing, it is widely used in scientific and industrial environments. HEATING ELEMENT Heating element of Memmert model are placed at the right & left side of the inner chamber and is made of special grade chrome plated Nichrome wire (ISI Approved) for uniform temperature. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : For Thermostat : ± 2°C or Digital : ± 1°C (or be Temp. Control : Temperature Controlled by Thermostat Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Temperature (SV) OPTIONAL ACCESSORIES: Digital Temperature Controller - Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

HOT AIR OVEN Thermostat type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use High Temperature Accuracy Better Uniformity CONSTRUCTION: Double walled construction inner chamber made of Mild Steel/ Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. The gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilations is provided on the top of unit to remove hot gases/fumes. Supplied with galvanized wire mesh shelves. The Lab Oven Digital is a high-performance laboratory oven featuring precise digital controls for accurate temperature regulation. It ensures uniform heating and reliable results, making it ideal for a wide range of scientific and industrial applications. HEATING ELEMENT Heating is by specially designed heaters made of special grade chrome plated Nichrome wire (ISI Approved) which is fitted at the bottom of the oven. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : ±1°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Temperature (SV) OPTIONAL ACCESSORIES Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

HOT AIR OVEN Lab Type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use CONSTRUCTION: Double walled construction inner chamber made of Mild Steel/ Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilations is provided on the top of unit to remove hot gases/fumes. Supplied with galvanized wire mesh shelves. The Hot Air Oven Labtype is a precision instrument designed for sterilization, drying, and thermal testing in laboratory settings. It provides consistent, high-temperature performance, ensuring reliable results for various scientific and industrial applications. HEATING ELEMENT Heating is by specially designed heaters made of special grade chrome plated Nichrome wire (ISI Approved) which is fitted at the bottom of the oven. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : ±2°C Temp. Control : Temperature Controlled by Thermostat OPTIONAL ACCESSORIES Digital Temperature Controller - Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

Lab Incubator GMP Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Superior Functionality High Temperature Accuracy Better Temperature Uniformity Lab incubators are essential equipment in the laboratory that provides a temperature-controlled environment to support growth of microbiological cultures. Other applications include coliform determination, egg incubation, heated storage, food and beverage testing, and pharmaceutical testing. CONSTRUCTION: Triple walled construction, Completely made of Stainless Steel Inner made of 316 Q & Outer made of 304 Q. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S locks hinges. Air Ventilations are placed at left & right side for hot gases/fumes. Inner door made of acrylic to see through the chamber. Supplied with Stainless Steel wire mesh shelves. Forced Air Circulating System with Fan for Temperature Uniformity. Safety Thermostat. HEATING ELEMENT: Heating element of GMP model are placed at the right & left side of the inner chamber and is made of special grade chrome plated Nichrome wire (ISI Approved) for uniform temperature. TECHNICAL DATA: Temp. Range : 5°C above ambient to 60°C Accuracy : ±0.5°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase