Stability Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Stability Chamber is designed to simulate and control environmental conditions such as temperature and humidity to assess the stability of products over time. It is essential for testing the shelf life and performance of pharmaceuticals, chemicals, and other products under controlled conditions. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Humidity Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Humidity Chamber is designed to provide precise temperature and humidity regulation for accurate and consistent testing. It is ideal for applications requiring controlled environmental conditions, such as material testing, stability studies, and product development. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo-controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Water Bath Serological Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Serological is designed for maintaining precise temperatures during serological and biological testing. It offers uniform heating and stability, ensuring reliable results for a range of diagnostic and research applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 60°C Accuracy : ± 2°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) * Optinal : Pyramid Lid.

Water Bath Rectangular Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

Digital Water Bath 6 holes Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

Muffle Furnace Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Light weight Easy to use Low Energy Consumption High Temperature Accuracy Most Useful for Ashing, Fusion, Iigniting and Heat treating of small parts in Chemical, Industrial Fields, Colleges. The Muffle Furnace is a high-temperature laboratory furnace used for ashing, heat treatment, and material testing. It features a robust design and precise temperature control, making it ideal for applications requiring uniform and controlled heating up to extreme temperatures. CONSTRUCTION Muffle Furnace Horizontal rectangular Outer body made of thick gauge Mild Steel with powder coating. Ceramic fibre wool insulation to prevent heat loss. Uniform heat distribution through all four sides with Kanthal A1 element. A special solid state silver fuse for protection of element in case of over-heating. TECHNICAL DATA Temp. Range : Maximum Temperature 1150°C & Working Temperature 1100°C Digital Temp. Controller : Micro-processor with dual display to view set temperature and current temperature with K type sensor and 1°C Resolution Power Supply : 230 Volts A.C 50 Hz Single Phase

HOT AIR OVEN Memmert Type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use High Temperature Accuracy Better Uniformity CONSTRUCTION: Triple walled construction, inner chamber made of Mild Steel / Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilation are placed at left & right side for hot gases / fumes. Supplied with galvanized wire mesh shelves. The Lab Oven Memmert Type is a reliable and efficient laboratory oven known for its precise temperature control and uniform heat distribution. Ideal for sterilization, drying, and thermal testing, it is widely used in scientific and industrial environments. HEATING ELEMENT Heating element of Memmert model are placed at the right & left side of the inner chamber and is made of special grade chrome plated Nichrome wire (ISI Approved) for uniform temperature. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : For Thermostat : ± 2°C or Digital : ± 1°C (or be Temp. Control : Temperature Controlled by Thermostat Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Temperature (SV) OPTIONAL ACCESSORIES: Digital Temperature Controller - Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

HOT AIR OVEN Lab Type Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Easy to use CONSTRUCTION: Double walled construction inner chamber made of Mild Steel/ Stainless Steel 304 Q & exterior made of G.I Sheets powder coated. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S lock, hinges. Air Ventilations is provided on the top of unit to remove hot gases/fumes. Supplied with galvanized wire mesh shelves. The Hot Air Oven Labtype is a precision instrument designed for sterilization, drying, and thermal testing in laboratory settings. It provides consistent, high-temperature performance, ensuring reliable results for various scientific and industrial applications. HEATING ELEMENT Heating is by specially designed heaters made of special grade chrome plated Nichrome wire (ISI Approved) which is fitted at the bottom of the oven. TECHNICAL DATA Temp. Range : 50°C to 250°C Accuracy : ±2°C Temp. Control : Temperature Controlled by Thermostat OPTIONAL ACCESSORIES Digital Temperature Controller - Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Motorised Air circulation Blower for Universal Tempreture. S.S Trays. Digital Temperature controller Cum Indicator with Timer. Safety Thermostat.

Lab Incubator GMP Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Superior Functionality High Temperature Accuracy Better Temperature Uniformity Lab incubators are essential equipment in the laboratory that provides a temperature-controlled environment to support growth of microbiological cultures. Other applications include coliform determination, egg incubation, heated storage, food and beverage testing, and pharmaceutical testing. CONSTRUCTION: Triple walled construction, Completely made of Stainless Steel Inner made of 316 Q & Outer made of 304 Q. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. The door is fully insulated with S.S locks hinges. Air Ventilations are placed at left & right side for hot gases/fumes. Inner door made of acrylic to see through the chamber. Supplied with Stainless Steel wire mesh shelves. Forced Air Circulating System with Fan for Temperature Uniformity. Safety Thermostat. HEATING ELEMENT: Heating element of GMP model are placed at the right & left side of the inner chamber and is made of special grade chrome plated Nichrome wire (ISI Approved) for uniform temperature. TECHNICAL DATA: Temp. Range : 5°C above ambient to 60°C Accuracy : ±0.5°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase