Stability Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Stability Chamber is designed to simulate and control environmental conditions such as temperature and humidity to assess the stability of products over time. It is essential for testing the shelf life and performance of pharmaceuticals, chemicals, and other products under controlled conditions. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Humidity Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Humidity Chamber is designed to provide precise temperature and humidity regulation for accurate and consistent testing. It is ideal for applications requiring controlled environmental conditions, such as material testing, stability studies, and product development. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo-controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

BOD Incubator Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES: Ergonomic Design Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity APPLICATIONS Biological Oxygen Demand Determination General Incubation Serum studies Enzyme Assays test Microbiology Lab The BOD Incubator is a specialized laboratory device designed for precise temperature control in biochemical oxygen demand (BOD) testing. It ensures stable conditions for accurate microbial and biochemical analyses, making it essential for environmental and wastewater studies. CONSTRUCTION Double walled construction, Inner chamber made of Stainless Steel 304 grade & Outer chamber made of Mild Steel powder coated. OR Inner chamber made of Stainless Steel 304 OR 316 grade & Outer chamber made of Stainless Steel 304 grade - G.M.P. model The chamber is insulated by filling CFC Free Polyurethane foam (PUF) or high temperature glass wool in the space between outer body and chamber to prevent temperature loss. Double door - Outer metal body & Inner Acrylic Door. Inner door - made of imported transparent Acrylic which is useful to view inner sample without opening the door and loss of temperature. Outer door with magnetic gasket & proper handle, lock & key. Supplied with Adjustable Stainless Steel wire mesh shelves. Forced Air Circulating System with Fan for Temperature Uniformity. High Quality Compressor. Illumination provided for inner chamber. Control panel with indicating Lamp for Compressor, Heater and on / off switch for mains. Inner chamber with smooth corners for easy cleaning. Castor wheets for easy movability. HEATING ELEMENT Heating is by specially designed air heaters. Hermetically sealed compressor unit for CFC free cooling system as per the capacity. TECHNICAL DATA Temp. Range : 5°C to 60°C Temp. Accuracy : ± 0.5°C Temp. Uniformity : ± 1°C Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C . Dual display one for process value (PV) & the another for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach - In BOD Testing Chmaber with in built recording, PC interface with 21 CFR Software, Dot Matrix Printer Interface. Data Logger for PC or Printer Attachment with software 4, 8, 12 Channel Data Scanner. Door access security system. Safety Digital Temperature Controller. Timer Recommended Stabilize.

COD DIGESTOR MANUFACTURER IN AHMEDABAD We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal ● The Cod Digester is designed for the digestion of chemical oxygen demand (COD) samples, providing precise temperature control to break down organic matter. It is essential for environmental and water quality analysis, ensuring accurate. ● Suitable for COD method for monitoring wastewater influent and effluent, industrial process water and more. Aluminium Heating block with holes is used to hold C.O.D tubes. (With tubes, condensers and stands). ● Temp. Range: Above ambient to 180°C. ● Timer: 99 Hr: 59 min. to switch off the heater after the test. ● Hole Size: 40mm dia. × 80 mm depth. ● Sample Volume: 20 ml. each. Model No. Tube Capacity HSI/COD-01 6 Tubes HSI/COD-02 9 Tubes HSI/COD-03 12 Tubes HSI/COD-04 15 Tubes HSI/COD-05 18 Tubes HSI/COD-06 21 Tubes HSI/COD-07 24 Tubes HSI/COD-08 36 Tubes Any Customize Size can be made as per your requirement

Fume Hood Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal * Complete S. S. Models are also Available Safety in the Laboratory is a primary concern. The fume hoods meet the challenge high degree of efficiency. A wide variety of models and comprehensive option packages have been designed to enable you to tailor your fume hood to a specification FUME HOOD MADE OF COMPLETE MILD STEEL: Are manufactured from best quality C.R.C.A. Sheets (Cold Rolled Case Annealed Low carbon steel sheets) of 18/20G which are duly epoxy polyester powder coated. Powder coating of this quality provides better protection from acid fumes in the lab. The Fume Hood is designed to provide a safe working environment by ventilating hazardous fumes, vapors, and particulates away from the user. It ensures effective containment and protection during chemical handling and experimentation in laboratory settings. FUME HOOD MADE OF COMPLETE WOOD: Are manufactured from well seasoned teakwood and 12mm thick marine plywood panels. Outer surface are lined with laminates Both Fumes Chamber: Are available with variety of lining and work surface like PP, PPGL, FRP, SS, (316), PVC, HDPE, suspended on suspended on safe device. It is provided with counter balance load for easy up and down movement * Are aerodynamically designed which provides most efficient airflow to the suction Are double wall construction which provides easy maintenance, access to service like Water gas, electricity etc. Are provided with support base having provision for air vent connection to evacuate lapped chemical vapor inside. Are provided with switch for easy starting of the centrifugal fan. High quality HDPE/FRP/PPGL/PP/PVC pipes & accessories are used for FC during We are using centrifugal PP/FRP Blower for Exhaust system of FC, 3 Phase Motor (Capacity according to need) is coupled with blower

Welding Electrode Drying Oven Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Capacity(Kg) 100 kg Material Mild Steel Temperature 300 deg. Celsius Power Source Electric Max Temperature 50 DegreeC to 400 DegreeC Usage/Application Drying welding electrode / Drying any kind of sample. Oven Type Welding Electrode drying Oven Air-Flow Direction Vertical Down Airflow Display Digital Automation Grade Automatic Minimum order quantity: 1 Piece Construction: Heavy dty rigid made up of complete MS outer powder cotaed. Heater: U TYPE Air heater coil fitted for uniform heating. Insulation: High grade glass-wool insulation for minimum heat loss. Temp. Range: 50 to 400 Deg. Digital microprocessor based PID temp. controller. Power: 230 volts AC single phase

Hot Plate Round Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Hot plates are used in a laboratory as a heat source that can uniformly heat solutions and materials. They are considered much safer than traditional Bunsen burners because there is no open flame involved, just a heated plate. Brand HSI Temperature Range 100 Deg C Stirring Capacity 2 MLH Stirring Top Size 6 x 6 inches Speed 1200 RPM Controller Speed and Temperature Regulator Minimum order quantity: 1 Piece With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of Magnetic Stirrer with Hot Plate. Other Details- Now you can stir, heat or do both stir with heat; our laboratory magnetic stirrers are available with and without heater. These magnetic stirrers deliver wonderful performance all the time they are used; Both speed and temperature controllers are provided on front panel. Standard units are manufactured with painted MS steel housing, stainless steel housing is provided as optional.

Industrial Hot Air Oven Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Capacity 0-100 Kg Max Temperature 400 DEGREE Oven Type WELDING ELECTRODE DRYING OVEN Material Mild Steel Display Digital Automation Grade Semi-Automatic Door Type Insulated door with powder coated Color powder coating Usage/Application welding electrode drying Electrical Supply 230 volts AC Welding Electrode Drying Oven Complete MS heavy gauge construction. Digital microprocessor based PID Temperature controller. High grade cerawool insulation for minimum heat loss. Temperature range: 300 / 400 / 450Deg. Capacity available : 25 kg , 50 kg , 75 kg , 100 kg etc...

Vacuum Oven Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Capacity(Kg) 100 kg Brand HEMA Usage/Application Drying purpose / Laboratory R&D purpose Temperature Range 50-250 Degree Celsius Temperature 200 deg. Celsius Material Stainless Steel Chamber Volume 60 Litre Number Of Shelves 2 Door Type Single Door Automation Grade Automatic Minimum order quantity: 1 Piece