Digital Water Bath 6 holes Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

COD DIGESTOR MANUFACTURER IN AHMEDABAD We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal ● The Cod Digester is designed for the digestion of chemical oxygen demand (COD) samples, providing precise temperature control to break down organic matter. It is essential for environmental and water quality analysis, ensuring accurate. ● Suitable for COD method for monitoring wastewater influent and effluent, industrial process water and more. Aluminium Heating block with holes is used to hold C.O.D tubes. (With tubes, condensers and stands). ● Temp. Range: Above ambient to 180°C. ● Timer: 99 Hr: 59 min. to switch off the heater after the test. ● Hole Size: 40mm dia. × 80 mm depth. ● Sample Volume: 20 ml. each. Model No. Tube Capacity HSI/COD-01 6 Tubes HSI/COD-02 9 Tubes HSI/COD-03 12 Tubes HSI/COD-04 15 Tubes HSI/COD-05 18 Tubes HSI/COD-06 21 Tubes HSI/COD-07 24 Tubes HSI/COD-08 36 Tubes Any Customize Size can be made as per your requirement

Water Bath Rectangular Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Water Bath Rectangular is a versatile laboratory instrument designed for precise temperature control in heating and incubating samples. Its rectangular shape allows for efficient use of space and uniform heat distribution, making it ideal for various scientific and industrial applications. CONSTRUCTION Double walled Construction, Inner made of Stainless Steel 304 Q mirror finished & Exterior made of Stainless Steel Matt finish / Mild Steel powder coated Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat loss and thereby saving energy. Diameter of holes 3" with Concentric Rings & I.S.I Mark Heating Element. TECHNICAL DATA Temp. Range : 5°C above ambient to 99°C Accuracy : ± 1°C Temp. Control : Temperature Controlled by Thermostat OR Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Temperature Controller with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the other for Set Value of Tempreture (SV) Power Supply : 230 Volts A.C 50 Hz Single Phase

Fume Hood Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal * Complete S. S. Models are also Available Safety in the Laboratory is a primary concern. The fume hoods meet the challenge high degree of efficiency. A wide variety of models and comprehensive option packages have been designed to enable you to tailor your fume hood to a specification FUME HOOD MADE OF COMPLETE MILD STEEL: Are manufactured from best quality C.R.C.A. Sheets (Cold Rolled Case Annealed Low carbon steel sheets) of 18/20G which are duly epoxy polyester powder coated. Powder coating of this quality provides better protection from acid fumes in the lab. The Fume Hood is designed to provide a safe working environment by ventilating hazardous fumes, vapors, and particulates away from the user. It ensures effective containment and protection during chemical handling and experimentation in laboratory settings. FUME HOOD MADE OF COMPLETE WOOD: Are manufactured from well seasoned teakwood and 12mm thick marine plywood panels. Outer surface are lined with laminates Both Fumes Chamber: Are available with variety of lining and work surface like PP, PPGL, FRP, SS, (316), PVC, HDPE, suspended on suspended on safe device. It is provided with counter balance load for easy up and down movement * Are aerodynamically designed which provides most efficient airflow to the suction Are double wall construction which provides easy maintenance, access to service like Water gas, electricity etc. Are provided with support base having provision for air vent connection to evacuate lapped chemical vapor inside. Are provided with switch for easy starting of the centrifugal fan. High quality HDPE/FRP/PPGL/PP/PVC pipes & accessories are used for FC during We are using centrifugal PP/FRP Blower for Exhaust system of FC, 3 Phase Motor (Capacity according to need) is coupled with blower

Welding Electrode Drying Oven Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal Capacity(Kg) 100 kg Material Mild Steel Temperature 300 deg. Celsius Power Source Electric Max Temperature 50 DegreeC to 400 DegreeC Usage/Application Drying welding electrode / Drying any kind of sample. Oven Type Welding Electrode drying Oven Air-Flow Direction Vertical Down Airflow Display Digital Automation Grade Automatic Minimum order quantity: 1 Piece Construction: Heavy dty rigid made up of complete MS outer powder cotaed. Heater: U TYPE Air heater coil fitted for uniform heating. Insulation: High grade glass-wool insulation for minimum heat loss. Temp. Range: 50 to 400 Deg. Digital microprocessor based PID temp. controller. Power: 230 volts AC single phase

Stability Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Stability Chamber is designed to simulate and control environmental conditions such as temperature and humidity to assess the stability of products over time. It is essential for testing the shelf life and performance of pharmaceuticals, chemicals, and other products under controlled conditions. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Humidity Chamber Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Flexible & Space Saving Stability Chamber Superior Functionality Negligible Maintenance High Temperature Accuracy Better Temperature Uniformity Long-Term stability tests The Humidity Chamber is designed to provide precise temperature and humidity regulation for accurate and consistent testing. It is ideal for applications requiring controlled environmental conditions, such as material testing, stability studies, and product development. TECHNICAL DATA For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH. Temperature Range: 10.0°C to 60.0°C Accuracy/Uniformity: ±0.1°C/+1°C Humidity Range: 25% to 95% RH Accuracy/Uniformity: ±2% RH / ± 3% RH Temperature/Humidity display: Digital LED 3.5 digit. Control: Microprocessor based PID control Auto tune. Resolution: 0.1°C/1% RH Temperature sensor: PT-100 RH sensor: Direct capacitance type Heating: 'U' shaped tubular heater in stainless steel. Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy. Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard Air circulation: cooling type fan with impellar/blower and flange type motor. Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door. Chamber illumination: Fluorescent light with door switch. Castor wheels for easy move ability with minimum weights bearing of 50kg. Trays: Stainless steel wire mesh heavy duty. Electrical: 230V/15A/50 Hz Calibration certificate by ERTL - Mumbai with traceability ERTL. SAFETY FEATURES High Temperature safety cut off Low water level boiler cut off Electrical overload cutoff relay for compressor Time delay for compressor switch ON Electrical circuit breaker PRE INSTALLATION MANDATORY REQUIREMENT (Guarantee void in case of non compliance) a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height. b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C. c) Stabilized input voltage of 230V A.C Amps. Use of servo-controlled stabilizer is recommended. d) Water Drain line with 1/2" nozzle to be provided at floor level. OPTIONAL ACCESSORIES Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface. R.H. Imported Sensor for 100% RH Readings. Standby Refrigeration Systems as per capacity. PLC for auto change over for standby refrigeration. CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication. Data Logger for Rs. 485 communication system with PC Connectivity. 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor. SMS Mobile alert system. Door Access Security system. Safety Digital Temperature Controller Timer Recommended Stabilizer.

Constant Temperature Water Bath Manufacturers in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal UNIQUE FEATURES Ergonomic Design Easy to use Negligible Maintenance Better Uniformity The Constant Temperature Water Bath provides stable and precise temperature control for a range of laboratory applications. It ensures uniform heating, making it ideal for tasks requiring consistent temperature conditions, such as sample incubation and chemical reactions. DESCRIPTION Double walled Construction, Inner made of Stainless Steel & exterior made of G.I Sheets powder coated / Stainless Steel . Gap between the two walls is filled with glass wool insulation. Heating is by immersion type heaters. Digital Temp. Controller : Micro-processor based Auto Tune P.I.D Digital Controller Temperature with PT 100 sensor & Resolution 0.1°C. Dual display one for process value (PV) & the another for Set Value of Temperature (SV) A circulation pump with motor is mounted on a base and fitted on the side of the bath for uniformity of temperature. Temperature Range : 5°C above ambient to 99°C. • Accuracy : ± 0.5°C. Power Supply : 230 Volts A.C 50 Hz Single Phase.

Viscosity Bath Manufactures in Ahmedabad We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal The Viscosity Bath is a specialized laboratory instrument used to measure and control the temperature of fluids for precise viscosity testing. It ensures accurate and consistent temperature conditions, facilitating reliable viscosity measurements for various research and quality control applications. DESCRIPTION Double walled Construction, Inner made of Stainless Steel & exterior made of G.I Sheets powder coated. Gap between the two walls is filled with glass wool insulation. A motor with stirrer for better temperature uniformity. Toughened glass window on both sides. Temperature Range : 5°C above ambient to 99°C. Accuracy : ± 0.5°C with digital temperature controller. Power Supply : 230 Volts A.C 50 Hz Single Phase. OPTIONAL ACCESSORIES: Viscosity Holder